T&S Manufacturing
Copyright 2002. All rights reserved. No part of this website may be used, period.

Sam W. Alvarez
1223 Mt. Vernon Rd.
Southington, CT  06489
860-426-1509 (phone)
860-628-8313 (fax)

100% M2HB (.50 cal) Sideplates


NOTE:   7/17/2007.   We've received enough requests for 100% M2HB plates that we're going to try a run late summer or this fall sometime.  We've also heard a rumor that approximately 150 M2HB parts kits may hit the market later this year.  If so, we want to be ready to supply our customers with the very finest 100% M2HB right side plates.
top quarter view .50 plate
 
We use the same approach to our .50 plates as our .30 plates. Each plate is lazer profiled from .375 (3/8") 4140 steel. All plates are blanchard ground (both sides) to "touch off" the plate to uniform thickness. Then, each plate is CNC machined to contain the holes, inside slots, and the inside "slope" (full auto plates only) at the rear area of the plate. These plates contain the charging handle slot, topcover bolt hole, trigger pack release pin hole, trunion bolt hole, inside slots, and inside slope.

We offer .50 plates for Title I (semi-auto) and Title II (full-auto) firearms. Our production runs on these plates is small (10-20 plates per run), and they go fast. We try to replenish stock promptly, but other work may delay production slightly.

Larger runs are dependent on user interest. Please email or call us with your interest, and also look for our user inquiries on all your favorite mg boards.


Please note plates only sold to qualified buyers.
NFA RULES APPLY
 
 



80% .50 cal plate horizontal view>



Thank you for visiting our little corner of the web. Feel free to email or phone us with your needs.



Next Page:   Prices

Back:   Home Page and .30 Plates

Thompson Page

Back to Top


Do it right!   See our warning page!


*** T&S Manufacturing ... the pursuit of Class II perfection ***


Click here for Tom Bower's "subguns.com" website.